Details

---

Features:

• Repairs under active leak up to 150 psi (11 kg/cm²) pressure
• No shutdown required
• Works on any metal or non-metal pipes
• Applicable to pipes up to 18″ (457 mm) diameter
• Repairs leak in 15 minutes
• Withstand pressure up to 500 psi (35 kg/cm²)
• Withstand temperature up to 200 °C (392 °F)
• Safe for drinking water and resistant to most chemicals
• Ideal for pipeline reinforcement

Applicable Material:

Steel	Stainless Steel
Copper	Polyethylene
Aluminium	Polypropylene
Galvanized Steel	Cast-iron
PVC	Concrete
CPVC	FRP/GRE

Chemical Resistance:

• Oil
• Water (drinking water, wastewater, steam)
• Solvents (acetone, toluene, MEK, ethyl alcohol)
• Mild acids (hydrochloric acid, sulfuric acid) and alkalis
• Chemical (ethylene glycol, xylenes, ammonia)
• Hydrocarbons
• Bases
• Slurries
• Fuels (petroleum, diesels, gasoline)
• Gases (LNG, LPG)
• Organic salts

Working Time: 

• 1 minute at 30 °C (86 °F)

Curing Time: 

• 30 minutes at 30 °C (86 °F)
• Heat may be applied to decrease curing time
• Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time

Application:

• Pipe repairs
  • Active pipe leaks
  • Sealing joints
  • Hazardous material spill control
  • Reinforce thinning walls
• Repairs in hard to reach areas
• Underwater repairs

Operating Temperature:

• -50 °C (-58 °F) to 200 °C (392 °F)

Operating Pressure: 

• Recommended for pressure up to 500 psi (35 kg/cm²)
• (Result vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

Applicable Industries: 

Building & Facilities	Electroncis	Industrial Processing
Irrigation	Oil & Gas	Chemical
Manufacturing Plants	Marine	Military
Petrochemical	Offshore	Food Processing
Pulp & Paper	Pharmaceutical	Power Generation
Wastewater	Water Distribution

Technical Data:

Tensile strength	3920 psi (276 kg/cm2)
Bond strength	230 psi (16 kg/cm2)
Tensile elongation	1.2 % ± 0.7 %
Compression strength	13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength	2260 psi (159 kg/cm2)
Cured hardness	82 Shore D
Dielectric strength	400 Volts/mil

Package:

• 1 roll of Wrap Seal® Fiberglass Tape + 1 roll of SealXpert® Ultra Sealing Tape
• 1 unit of Seal Stic® Quick Cure Epoxy
• 1 pair of latex gloves
• Operating instruction