Details

---

Features:

• Medium strength, thixotropic
• Easy removal, parts can be separated with hand tools
• Good oil resistance, can be used on the surface with slight oil contamination
• Controlled lubricity for accurate clamp loads

Application:

• Prevent threaded fasteners from loosening and leakage
• Used for locking and sealing M8 – M20 (Ideal for under M18) threaded fasteners
• Typically suitable for inert surface, such as stainless steel and electroplated surface

Package:

• 50 ml / bottle

Technical Data:

Product No.	Typical Use	Max Gap Fill mm	Uncured			Cured			Curing Speed
			Colour	Viscosity mPa.s	Specific Gravity g/cm3	Breakaway Torque Nm	Prevail Torque Nm	Temperature Range °C (°F)	Fixture min	Full Cure hour
AT222	M2 – M8, removable	0.13	Purple	1,200 Thixotropic	1.05	6	4	-50 to 150 (-58 to 302)	10 – 20	24
AT242	M8-M16, removable	0.13	Blue	1,700 Thixotropic	1.05	12	5	-50 to 150 (-58 to 302)	10 – 20	24
AT243	M8-M20, slight oil contamination	0.13	Blue	2,250 Thixotropic	1.05	20	7	-50 to 150 (-58 to 302)	10 – 20	24
AT262	M10-M26, permanent locking and sealing	0.13	Red	1,800 Thixotropic	1.10	22	30	-50 to 150 (-58 to 302)	10 – 20	24
AT270	M25, permanent locking and sealing	0.13	Green	500	1.10	26	36	-50 to 150 (-58 to 302)	10 – 20	24
AT271	M16-M26, permanent locking and sealing	0.13	Red	500	1.12	27	30	-50 to 150 (-58 to 302)	10 – 20	24
AT272	M25-M80, permanent locking and sealing	0.25	Red-orange	4,000 – 15,000 Thixotropic	1.11	23	25	-55 to 200 (-67 to 392)	40	24
AT277	M24-M36, permanent locking and sealing	0.25	Red	7,000	1.12	30	30	-50 to 150 (-58 to 302)	23 – 30	24
AT290	Under M12, wicking grade	0.10	Green	12	1.08	10	26	-50 to 150 (-58 to 302)	5 – 15	24