Details
Features:
- Maximum high strength, high viscosity
- Fixture in 5 minutes
- Used for retaining cylindrical assembly where fit clearance can approach 0.01” (0.26 mm) and where maximum strength at room temperature is required
- Lock bushings and sleeves into housings and on shafts
- Designed for transition and interference fit
| Product No. | Typical Use | Max Gap Fill mm | Uncured | Cured | Curing Speed | ||||
| Colour | Viscosity mPa.s | Specific Gravity g/cm3 | Shear Strength Psi (kg/cm2) | Temperature Range °C (°F) | Fixture min | Full Cure Hour | |||
| RC603 | Slightly oil contaminated surface | 0.13 | Green | 200 | 1.10 | > 2901 (> 204) |
-50 to 150 (-58 to 302) |
5-10 | 24 |
| RC620 | High temperatures 232°C (450 °F) | 0.30 | Green | 8,500 | 1.15 | > 2901 (> 204) |
-50 to 230 (-58 to 446) |
30-100 | 24 |
| RC638 | Maximum strength | 0.26 | Green | 2,500 | 1.09 | > 4496 (> 316) |
-50 to 150 (-58 to 302) |
5-10 | 24 |
| RC648 | Withstands continuous working high temperature up to 175 °C (347 °F) | 0.15 | Green | 500 | 1.15 | > 2611 (> 184) |
-50 to 175 (-58 to 347) |
5-15 | 24 |
| RC680 | For Clearance and transition fit | 0.25 | Green | 1,250 | 1.12 | > 2756 (> 194) |
-50 to 150 (-58 to 302) |
10-15 | 24 |
View more about SealXpert RC638 Retaining Compound on main site