Details

---

Features:

• High strength, medium viscosity
• Enhances bonding strength

Application:

• Used for diametral clearance of less than 0.01” (0.25 mm) clearance fit or transition fit with the best fit clearance between 0.002” (0.05 mm) to 0.004” (0.10 mm)
• Replace press fit and prevent rust
• Used for slight rotating (worn) bearing, shaft sleeve etc. fittings, retain belt pulley, bushing, gear wheel, rotor, rebuild hole-shaft fitting parts and out-of-tolerance parts
• Designed for transition and interference fit.

Technical Data:

Product No.	Typical Use	Max Gap Fill mm	Uncured			Cured		Curing Speed
			Colour	Viscosity mPa.s	Specific Gravity g/cm3	Shear Strength Psi (kg/cm2)	Temperature Range °C (°F)	Fixture min	Full Cure Hour
RC603	Slightly oil contaminated surface	0.13	Green	200	1.10	> 2901 (> 204)	-50 to 150 (-58 to 302)	5-10	24
RC620	High temperatures 232°C (450 °F)	0.30	Green	8,500	1.15	> 2901 (> 204)	-50 to 230 (-58 to 446)	30-100	24
RC638	Maximum strength	0.26	Green	2,500	1.09	> 4496 (> 316)	-50 to 150 (-58 to 302)	5-10	24
RC648	Withstands continuous working high temperature up to 175 °C (347 °F)	0.15	Green	500	1.15	> 2611 (> 184)	-50 to 175 (-58 to 347)	5-15	24
RC680	For Clearance and transition fit	0.25	Green	1,250	1.12	> 2756 (> 194)	-50 to 150 (-58 to 302)	10-15	24